Colours come to life

SIMOPOR SP has been designed specifically for digital direct printing. Boasting a unique formula, it delivers superb printing results with brilliant image reproduction. The smooth, finely structured surface finish facilitates ink acceptance even during high-speed processing.

Properties:

  • Excellent printability on a wide range of flatbed printers
  • Optimised shade of white for vibrant images in digital direct printing
  • Excellent ink acceptance
  • Suitable for all standard UV and solvent inks
  • Very good processing properties
  • High level of flatness
  • Low flammability
  • Suitable for laminating and spray-painting
  • Very resilient, including outdoor applications

Colour:

  • Functional white
    (optimised shade for digital printing)

Product range

SIMOPOR SP
Extruded sheets (size/thickness in mm)
2,440 x 1,2201 to 10
3,050 x 1,2201 to 10
3,050 x 1,5301 to 10
3,050 x 2,0301 to 10
4,050 x 2,0303, 5

All dimensions specified are standard dimensions. Other sizes, thicknesses and colours available on request. Products in various formats and thicknesses are available from stock. Please contact our sales department for further details concerning availability: sales@simona.de.

Material specifications

SIMOPOR SSIMOPOR SPSIMOPOR ESIMOPOR EPSIMOPOR-COLOR
Tensile modulus of elasticity,
MPa, DIN EN ISO 527
9008507007501,000
Flexural modulus of elasticity,
MPa, DIN EN ISO 178
1,1001,0008008501,400
Impact strength, kJ/m2,
DIN EN ISO 179
121291012
Shore hardness D (15 s),
DIN EN ISO 868
3532252835
Mean coefficient of linear
thermal expansion, K–1,
ISO 11359-2
0.7 x 10–40.7 x 10–40.7 x 10–40.7 x 10–40.7 x 10–4
Specific surface resistance,
Ohm, DIN IEC 60093
≥ 1013≥ 1013≥ 1013≥ 1013≥ 1013
Fire behaviourDIN 4102B1:
1 to 19 mm*
B2
(self-assessment without test certificate)
NF P 92-501M1:
3 to 10 mm*
M1:
1 to 10 mm*
DIN EN 13501-1Euroclass B-s3-d0:
1 to 19 mm*
Euroclass C-s3-d0:
1 to 19 mm*
Tests pending*
Temperature range,°C0 to + 600 to + 600 to + 600 to + 600 to + 60

*Test certificate expected to be available from end of September 2019

All specifications are deemed to be approximate values in respect of the specific material and may vary depending on the processing methods used. In general, data specified applies to average values measured on extruded sheets with a thickness of 4 mm. Deviations from the values specified are possible if the sheets in this thickness are not available. Information presented herein is not necessarily applicable to other products (e.g. pipes, solid rods) of the same material or products that have undergone downstream processing. Suitability of materials for a specific field of application must be assessed by the party responsible for processing or the end-user. All technical specifications presented herein are designed merely to provide assistance in terms of project planning. They do not constitute a guarantee of specific properties or qualities.